AccuMate charges and maintains irregularly used batteries. AccuMate is designed to automatically charge and monitor batteries with no danger of over-charging regardless of time. Suitable for both 6v and 12v batteries

With its selectable 6V or 12V output, AccuMate is suitable for all 6V and 12V lead acid batteries from 4Ah to 75Ah, making it perfect for owners of vehicles which are not used on a daily basis. Uses include classic cars, especially MGB, VW & American Cars with 6V batteries, modern sports cars, off-road cars, race cars & bikes, tractors, lawn & garden equipment, emergency service vehicles – basically anything which requires a fully charged lead-acid battery needs AccuMate. Operation of AccuMate is completely automatic. It uses a 1.2A constant current charge as the main stage, while monitoring the battery voltage. When this reaches a pre-set cut off point, it then switches to an intermediate constant voltage 'float charge'. Only when AccuMate has detected that the battery is properly charged will it switch to the final stage for correct long-term battery maintenance and indicate a green LED. If at any time AccuMate detects that the battery has discharged, it will automatically revert to the constant current stage. AccuMate 6-12V - 4 step charger & maintainer for 6V and 12V batteries No risk of overcharging – designed for long-term connection. AccuMate`s special monitoring circuits vary & regulate the current & voltage exactly according to the battery manufacturer’s specifications. SAFE & foolproof - No worries about wrong connections, accidentally shorting the battery clamps or blowing fuses. Automatic protection even suppresses sparks. Compact, yet powerful - Will safely charge 12V batteries discharged to as low as 3V (1.5V for 6V batteries) when other chargers are unable to. Charging time equal to a 3 Amp conventional charger despite the compact size. No risk of overheating - Automatic temperature control regulates charge current to a safe level in hot or enclosed conditions. Delivered with two interchangeable connection sets, one with clamps for bench charging, the other with in-line protection fuse and eyelet terminals for permanent connection to the vehicle’s battery to allow easy reconnection of charger when necessary. CE Certification